Furuno RD-50 Operator's Manual page 35

3. Press or key to select [Unit] and press the ENT key.
4. Press or key to select [DISP1 (2, 3, 4 or 5)], for which you preset the units
of measurement, and press the ENT key.
5. Press or key to select [Speed], [Distance], [Depth], [Wind Speed] or [Water
TEMP] then press the ENT key.
Speed
Speed, Distance, Depth, Wind Speed, Water TEMP options
6. Press or key to select each unit and press the ENT key.
7. Press the DISP key to close the menu.
Display options
Unit options
Distance
Wind Speed
Depth
Water TEMP
2. MENU
2-19