Preparing For A Videoconference Using Sip; Installing The Sip Software - Sony IPELA PCS-G70 Operating Instructions Manual

Preparing for a Videoconference Using
SIP

Installing the SIP Software

Notes on installing the SIP software
• You cannot install the software if the write-protect tab on the "Memory
Stick" in which the SIP software is stored is set to "LOCK".
• Once the SIP software is installed in the Communication Terminal, the
software will not be used again.
• You cannot install the SIP software which is copied to another "Memory
Stick" with a computer, etc.
1
Set the power switch on the right side of the Communication Terminal to
the off position (
2
Insert the "Memory Stick" containing the PCSA-SP1 SIP software into the
Memory Stick slot.
Insert the "Memory Stick" in the direction of the arrow with the mark facing
upward.
3
Set the power switch on the right side of the Communication Terminal to
the on position (
The SIP software is installed in the Communication Terminal.
a ).
PCSA-SP1 SIP software
@ ).

Preparing for a Videoconference Using SIP

237