Using Training - Sony IPELA PCS-G70 Operating Instructions Manual

Using Training

When you go through the Training feature, the faces of conference participants
within the camera's shooting range are detected, and their positions are
recognized. This feature increases the accuracy of the left and right movements
made to face speakers in Speaker Tracking and Next Face Centering modes.
1
Press the MENU button on the Remote Commander to display the Setup
menu, then press the V or v button to select the
The Camera menu appears.
2
Use the V, v, B or b button on the Remote Commander to select
"Training", then press the PUSH ENTER button.
The camera looks in each direction and records the face of each participant for
detection later. This process takes about 40 seconds.
Notes
• Going through the Training feature is not required to use the tracking camera. The
positions of speakers are remembered automatically during a conference as the
camera faces a speaker and detects their face.
• When the Training feature is in use, all other camera operations are disabled.
• The faces of conference participants may not be properly recorded in the
following cases. If they are not properly recorded, adjust the zoom or camera
placement.
- The participant's entire face is not within the screen.
- The participant's face takes up less than 1/10 of the entire space of the screen.
- The participant does not face the camera directly.
- The participant's face is tilted to the left or right.
- The image is too dark.
For more details on the Camera Unit, see "Using the PCSA-CTG70/
CTG70P Camera Unit" on page 152.
122
Adjusting the Camera
(camera) icon.