System Configuration Via An Isdn For Multipoint Conference - Sony IPELA PCS-G70 Operating Instructions Manual

System Configuration via an ISDN for Multipoint Conference

You need to connect the optional PCSA-B384S, PCSA-B768S, or PCSA-PRI
ISDN Unit especially designed for use with this system and to install the
optional PCSA-M0G70 H.320 MCU software.
This allows you to:
• Hold a multipoint videoconference among up to six sites over ISDN.
• Show still images stored on a "Memory Stick".
• Show the still images on the second TV monitor or projector.
• Pick up a large number of participants' voices using up to two external
microphones.
System configuration
1 PCS-PG70/PG70P Communication Terminal
2 PCSA-CG70/CG70P Camera Unit (not supplied)
3 PCS-RG70 Remote Commander
4 Remote Control Receiver
5 TV monitor (not supplied)
6 PCSA-M0G70 H.320 MCU software (not supplied)
7 PCSA-B384S, PCSA-B768S or PCSA-PRI ISDN Unit
(not supplied)
8 PCS-A1 Microphone (not supplied)
22
System Configuration
*
The illustration shows an
example using the PCSA-B768S
ISDN Unit.