Holding A Meeting With Multiple Remote Parties; Preparing For A Multi Meetings - Sony PCS-5100 Operating Instructions Manual

Holding a Meeting with Multiple Remote Parties

Preparing for a Multi Meetings

1-20
Chapter 1 Using the Basic System
The PCS-5100/5100P Rollabout Package allows for audio and visual
connection of up to four different parties (PCS-5000/4000 series system*)
at the same time.
* PCS-5100/5100P are contained in the PCS-5000 series system.
You begin a four-party meeting by dialing and making line connection
with parties A, B, and C. Once the lines have been connected, party A
connects automatically with party B, party B connects with party C and
party C connects with party A to form the line connection setup indicated
in the following figure.
Once connections have been made, all four parties can meet as a single
group.
Party A
Notes
• A multi meeting can only work when each party uses a PCS-5000/4000
series system.
• A multi meeting can only be held via the ISDN lines.
• During a multi meeting, you will not be able to adjust a remote party's
camera.
• During a multi meeting, you will not be able to send USER DATA.
Notes
Before starting a multi meeting, check to see if you have the following:
• 3 ISDN lines (2 lines if you are having a meeting with two other parties).
• Entries for [LDN] in the SETUP menu have been completed. (See page 2-14)
Local party
Party C
Party B