Using the PCSA-CTG70/CTG70P
Camera Unit
The optional PCSA-CTG70/CTG70P Camera Unit automatically detects the
direction of the person speaking.
To connect the PCSA-CTG70/CTG70P Camera Unit
To use the features of the PCSA-CTG70/CTG70P Camera Unit, connect it to
the first MAIN CAMERA connector. Otherwise, it operates as a secondary
camera.
To use the Camera Unit
Select the mode you want to use from the Camera menu (page 117).
Note on using the PCSA-CTG70/CTG70P Camera Unit
• Place the Camera Unit level to and 1 m to 4 m (3.3 ft. to 13.2 ft.) away from
conference participants. However, in Presenter mode, place the camera at
least 3 m (9.8 ft.) away from the subject.
• Do not place obstructions between the camera and participants. In Presenter
mode, tracking may not function properly if there are people between the
camera and the speaker.
• Place the camera at least 1 m (3.3 ft.) away from walls and obstructions.
Sound reverberations may cause improper functioning.
• When using the Camera Unit's automatic pan/tilt functions, such as Training
and automatic angle adjustment, do not use the Remote Commander to adjust
the pan/tilt or to perform a preset operation because this can cause the camera
to malfunction.
152
Using the PCSA-CTG70/CTG70P Camera Unit
PCSA-CTG70/CTG70P Camera Unit (not supplied)
to MAIN CAMERA
TERMINAL
VISCA OUT
Camera cable (supplied)