Receiving The Broadcast Requested From Any Other Terminal - Sony IPELA PCS-G70 Operating Instructions Manual

A Dual Broadcast: Broadcasts in dual video the picture of the terminal
connected first in the broadcast mode.
B Dual Broadcast: Broadcasts in dual video the picture of the terminal
connected second in the broadcast mode.
C Dual Broadcast: Broadcasts in dual video the picture of the terminal
connected third in the broadcast mode.
D Dual Broadcast: Broadcasts in dual video the picture of the terminal
connected fourth in the broadcast mode.
E Dual Broadcast: Broadcasts in dual video the picture of the terminal
connected fifth in the broadcast mode.
Stop Broadcast: Stops broadcasting in the Broadcast Mode.
To display the local picture in the Voice Activate mode
You can display the local picture only on your monitor screen while the
broadcast mode remains in Voice Activate mode.
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
2
Use the V, v, B or b button to select "Near" under "Display", then press
the PUSH ENTER button.
The local picture appears on your monitor screen.
To restore the Voice Activate mode
Press the FAR/NEAR button on the Remote Commander again, and select
"Far" under "Display".

Receiving the Broadcast Requested From Any Other Terminal

When you receive "Self Broadcast" command from one of the terminals
connected, the picture of that terminal is broadcast in full screen.
When you receive "Stop Broadcat" command from one of the terminals
connected, the system returns to the previous mode.
Notes
• If you have received "Self Broadcast" command from another terminal, the operation
above will not be carried out.
• When you use a cascade connection, the Video Communication System supports the
Voice Activate mode only.
Using the Display Control
225