Setting Up the Network Configurations
This section describes how to set up the network configurations for use with
various networks.
For details on the LAN Setup menu, see "LAN Setup Menu" (page 66).
For details on configurations, consult with the system administrator.
LAN (Connecting via DHCP)
Configuration example
LAN1
Set the "DHCP Mode" to "Auto" under Page 1/2 of the General screen in the
LAN Setup menu.
The setting has been configured properly if the IP address appears in the
launcher menu.
To conduct a video conference
Select "IP" under "Line I/F", enter the remote party's IP address, and dial.
DHCP Server 1
LAN2
Setting Up the Network Configurations
83