3
Use the V, v, B or b button on the
Remote Commander to select the
menu you want to set, then press the
PUSH ENTER button.
The selected setup menu appears.
4
Use the V, v, B or b button on the
Remote Commander to select the
menu you want to set, then press the
PUSH ENTER button.
The selected setup menu appears.
5
Press the V or v button to select the
item you want to set or adjust, then
press the PUSH ENTER button.
When an item is selected from the list,
the settings for the selected item appear.
General Setup
Device Setup
Page:
1/2
MM/DD/YYYY HH:MM:SS
Clock Set
01/01/2004 10 :10 :10
Terminal Name
PCS-G70
Standby Mode
Standby Time
Last Number Registration
Control by Far End
Off
minutes
On
On
Off
Off
Save
Cancel
6
V
v
Press the
or
button to select an item
from the list, then press the PUSH
ENTER button.
Note
For items that require text entry, press
the Remote Commander button, enter
the desired text, and then press the
PUSH ENTER button.
7
Press the v button to
The selected
select "Save", then press the PUSH
ENTER button.
General Setup
Device Setup
Page:
1/2
MM/DD/YYYY HH:MM:SS
01/01/2004 10 :10 :10
Clock Set
Terminal Name
PCS-G70
Standby Mode
Standby Time
Last Number Registration
Control by Far End
The selected setting is saved.
To return to the previous menu
Press the RETURN button on the Remote
Commander.
Using the Menus
Off
minutes
On
On
Save
Cancel
43