Table of Contents
Advertisement
12.3 Cleaning the paper chute
Clean the paper chute inside the unit when a line or a
dirty pattern appears at the top or bottom of your
recording paper.
1
Turn the power switch OFF.
2
Push the left cover open lever (1) upward, then pull
open the left cover (2).
2
3
Caution:
L During or immediately after printing,
the fuser unit (3) gets hot. Wait until
the fuser unit cools down before
cleaning the paper chute.
Note:
L Do not touch the rollers (4).
1
4
3
Clean the paper chute (5) with a dry paper towel or
tissue.
Note:
L Do not touch the black belt (6), or rub it strongly.
4
Close the left cover.
5
Turn the power switch ON.
12. Cleaning
5
6
107
Advertisement
Table of Contents
