Optional Equipment; Door Shell Installation - Lopi Revere Owner's Manual

Door Shell Installation

Part Numbers: Black # 99300195, Brass # 9930096, Pewter # 99300197
1 Remove the door retainer shipping latch following the directions below.
Standard
Screwdriver
Rotate this shaft
1/4 turn clockwise
until the door
unlatches.
2 Place the door shell face down on a non-scratching surface. Lift the door retainer off the hinges.
Insert the retainer into the door shell following the directions below. Note how the door shell is guided
into place
© Travis Industries

Optional Equipment

Swing the door retianer open. Remove and
discard the shipping latch and nut.
Shipping Latch
Door Retainer
Door Shell
100-01165
Door Retainer
9/16" Wrench
The indent on the door retainer slides into
the clip on the door shell (on both sides).
29
4040806