GE Monogram ZDP486ND Technical Service Manual page 32

6. Remove the two 1/4-in. hex-head screws from
the front and the two 1/4-in. hex-head screws
from the rear of the grill burner.
Front of Grill Burner
Rear of Grill Burner
7. Lift up and maneuver the grill burner past the
igniter bracket.
Grill Burner Removed
8. Remove the grill burner igniter. (See
.)
Igniter
9. Place the control panel in the service position.
(See
Control Panel
10. Remove the 2 Phillips-head screws and the
center trim, if applicable.
11. Remove the 2 Phillips-head screws from the
front and the 2 Phillips-head screws from the
rear of the grill burner box.
Front of Grill Burner Box
Rear of Grill Burner Box
11. Lift up and remove the grill burner box.
– 32 –
Grill Burner
.)