GE Monogram ZDP486ND Technical Service Manual page 16

How to Set the Oven for Proofi ng
The proofi ng feature maintains a warm environment
which is useful for rising yeast-leavened dough.
1. Turn the Oven Mode Selector to
display will show "PrF". PROOF mode will not
operate when oven is above 125°F. The display
will scroll "too hot". Allow the oven time to cool.
For best results, cover the dough with a cloth or with
greased plastic wrap.
Use rack position B or C in the large oven. Use rack
position B in the companion oven. See Owner's
Manual.
The proofi ng feature automatically provides the
optimum temperature (95°F) for the proofi ng
process; therefore the Temperature knob does not
affect the proof temperature.
The oven interior lights cycle on and off as
necessary to maintain optimum proof temperature
until the Oven Mode Selector has been turned to
OFF.
• To avoid lowering the oven temperature and
lengthening proofi ng time, do not open the oven
door unnecessarily.
• Check bread products early to avoid over-
proofi ng.
2. When proofi ng is fi nished, turn the Oven Mode
Selector to OFF.
How to Set the Oven for Cleaning
Caution: See owner's Manual for Self-cleaning
safety precautions.
PROOF. The 1.
2.
The control automatically defaults to the
recommended clean cycle time of 5 hours. The
clean time may be adjusted to any time between
3 and 5 hours using the Mini-Knob. The display will
show the actual time remaining.
3. Push the Mini-Knob to start the CLEAN cycle. If
The
will not be possible to open the oven door during the
clean cycle.
4. After the clean cycle is complete and the oven
To interrupt a clean cycle, turn the Oven Mode
Selector and the Temperature knob to OFF. When
the oven has cooled to a safe temperature, the
symbol will turn off indicating the door may be
opened.
An interrupted clean cycle cannot be restarted until
after the oven is cool enough for the door to unlock.
– 16 –
Turn the Oven Mode Selector to
Turn the Temperature knob to
"CLOSE door" scrolls in the display, the self-clean
cycle has been selected but the door is not
closed. Close the oven door.
symbol will fl ash as the oven door is locked. It
has cooled, "End" will show in the display and
the will turn off. Turn the Oven Mode Selector
and the Temperature knob to OFF.
CLEAN.
CLEAN.
Mini-Knob
Turn to adjust
Push to select
(Continued next page)