Department Code
Sending Document with Department Code
Make sure that the FAX/EMAIL lamp is ON. If not, press
1a
1b
2
3
4
5
96
Place original(s) face up on the ADF.
or
Place a book or an original face down on the Platen Glass.
Enter a Identification Code (Department Code) and press
Dial by any combination of the following methods:
• Manual Number Dialing, press
stations)
• Address Book Dialing (up to 200 stations)
Ex:
PANASONIC
The document is sent with the header of the selected Department Name. The
selected Department Name is printed on the COMM. Journal and Individual
Transmission Journal.
after each station is entered (up to 70
OK
Memory Transmit STN(s):001
TO: PANASONIC
5551234
QUALITY DEPT
PANASONIC
to select the "FAX/EMAIL" mode.
.
OK
Input Identification Code
_