Inbound Routing
Setting the Routing Parameters
Your machine can route documents received from a G3 fax machine to email address(s) or to Internet Fax
machine(s) connected to a LAN as an email, as well as to other G3 fax machine(s) over the telephone line.
To use this feature, the Fax Parameter No. 152 "Sub-addr Routing" and/or No. 153 "TSI Routing" must be
set to "2:Valid".
No. 152 Sub-addr Routing: Set this parameter to perform an ITU-T sub-address query within its auto dialer
and to route the received document(s) to the corresponding stations email address(s) or telephone
number(s).
No. 153 TSI Routing: Set this parameter to perform a Numeric ID (TSI frame information) query within its
auto dialer and to route the received document(s) to the corresponding stations email address(s) or
telephone number(s).
No. 154 Routing Header Format: Use this parameter to select the type of email header to be included in the
"From" field of each routed faxes. (Default setting is "1:Originator")
Originator : The originating fax machine's TSI will appear in the "From" field of the routed email.
Relay Station : The routing station's email address will appear in the "From" field of the routed email.
No. 155 Print Routed Document: Set this parameter to select whether a received fax to be routed is always
printed on your machine or only when the routing operation fails.
To set the above Inbound Routing parameters, follow the steps below.
151