Panasonic DP-2330 Operating Instructions Manual page 228

Glossary
Power Saver Mode
Print Collation
Print Reduction Modes
Program Keys
Protocol
PSTN
Qwerty Keyboard
Receiving Password
Relay Address
Relay Network
Relay Station
Relay Transmission
Report
Relayed Transmission
Resolution
Rotation XMT
Router (Gateway)
Selective Reception
Sender Selection
Server
228
To reduce the power consumption of the machine in standby, select the time period to turn
OFF the high temperature fuser unit when the printer is idle.
The ability to stack received documents in the correct order.
The methods used to determine how an incoming document will be reduced to print onto the
paper loaded in your machine.
Keys that are defined for storing a sequence of stations to be dialed or polled.
A protocol is the special set of rules for communicating that the end points in a
telecommunication connection use when they send signals back and forth. Both end points
must recognize and observe the protocol.
Public Switched Telephone Network. Network of interconnected switching equipment and
transmission facilities.
A keyboard on the Touch Panel Display that is used to enter letters and symbols for various
programming functions.
A 4-digit password that is checked before a document is received.
A 3-digit code that identifies your machine is programmed in a relay network.
A group of facsimile machines that communicate via a relay station.
A certain type of facsimile machine that can store and forward documents to an end receiving
station and/or a relay station in another relay network.
Your machine can not be used as a relay station.
A report that contains information regarding the last document transmission to a relay station.
Sending a document to a relay station, which in turn, sends the document to the end
receiving station.
Relates to the number of dots scanned or printed per certain square. The quality of the
image increases as the number of dots per certain square increases.
The document is set as (
A special purpose computer (or software package) that handles the connection between 2 or
more networks.
Gateways act like traffic cops, they spend their time looking at the destination addresses of
the packets passing through them and deciding which route to send them on.
A function that can be set so that your unit will receive from only those machines
programmed into your dialer.
The user can select one of 24 pre-programmed sender's name and email address/telephone
number before each transmission.
A computer, or a software package, that provides a specific kind of service to client software
running on other computers.
A single server machine could have several different server software packages running on it,
thus providing many different servers to clients on the network.
), the image is rotated by 90º and then transmitted as ( ).