On-Hook Dialing - Panasonic DP-2330 Operating Instructions Manual

Sending Documents

On-Hook Dialing

On-Hook Dialing
For On-Hook Dialing, follow the steps below.
1a
1b
2
3
4
NOTE
28
Place original(s) face up on the ADF.
or
Place a book or an original face down on the Platen Glass.
You will hear dial tone through the monitor speaker.
If required, press the
(See page 176)
Dial the telephone number using the keypad.
Ex:
5 5 5 1 2 3 4
When you hear a beep,
1. If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
TONE
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234
key, and adjust the Monitor volume.
SET
(represented by a "/").
to
PAUSE