Changing The Start Time Or The Station Of A File - Panasonic DP-2330 Operating Instructions Manual

Changing the Start Time or the Station of a File

To change the start time and/or stations in a communication file, follow the steps below.
Make sure that the FAX/EMAIL lamp is ON. If not, press
1
MODE SETTING
2
CHANGE TIME/STN
3
Select the file that you want to change and press
• Enter the new start time by over writing the current start time.
4
Enter a new start time and press
Continued on the next page...
EDIT FILE MODE
Edit File Mode
Select A Function
DEFERRED POLLING/
BASIC MENU
COMM. ADV.COMM.
FILE LIST
DELETE FILE
ADD DOCUMENT
Change Time/Stn
Check Setting
Press OK
MEMORY XMT
INCOMP
MEM. DEF. XMT
DEFERRED COMM.
MEM. DEF. XMT
DEFERRED COMM.
.
OK
Confirm Destinations
Check And Press OK
PANASONIC
5551234
Edit File Mode
to select the "FAX/EMAIL" mode.
SELECT EDIT FILE
PRINT OUT
MODE MODE
CHANGE TIME/STN
PRINT FILE
RETRY INCOMP. FILE
No.003 P002
SALES DEPT
No.014 P001
22:00 TOKYO
No.018 P002
20:30 PANASONIC
.
OK
Defferred Transmit
Enter The Start Time
20:30
MEMORY XMT
ADDRESS BOOK
600dpi
STD FINE S-FINE
LIGHTER DARKER
TEXT TEXT/PHOTO PHOTO
101