User Selectable Features Descriptions - Column Three - Clifford IntelliGuard 850 Installation Manual

Directed electronics
Table of Contents

Advertisement

panic - off/on
Off: The panic feature is not available.
On: The panic feature is available.
auto start setting - off/battery only/temp only/battery and temp
This feature is only available with the IntelliStart option.
Off: The vehicle will not autostart.
Battery: The vehicle will only autostart when the car battery gets low.
Temperature: The vehicle will only autostart at a preset low temperature.
Battery and temperature: The vehicle will autostart with a low car battery or low
temperature.
N N O O T T E E : : Temperature and battery calibration and settings can be made only with the
Cliffnet Wizard.
blackjax - off/on
Off: The system cannot enter BlackJax mode.
On: The system will enter BlackJax mode when triggered.

user selectable features descriptions - column three

The features in this column pertain to programming individual transmitter channels in
custom configurations. Following is an explanation of the features. Program the indi-
vidual transmitter channels following the instructions in programming note #2.
arm/disarm only
The remote control channel programmed into this feature will arm/disarm the
system only.
N N O O T T E E : : When programming a new remote control to custom configuration a channel
must first be programmed to this feature before programming the remaining channels.
accessory a output
The transmitter channel programmed into this feature will activate the accessory
output.
accessory b output
The transmitter channel programmed into this feature will activate the accessory
output.
© 2004 directed electronics, inc.
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents