Table of Contents
Advertisement
1.
Disarm system.
2.
Transmit Channel 16. (Press
The LED will turn on and the siren will chirp 1 time.
Primary (full trigger) zone adjustment has now been entered.
Primary zone can now be adjusted.
3.
Adjusting Primary Zone
Press
Press
The sensor Primary zone can be tested at any time during adjustment and
will generate 1 siren chirp each time the zone is activated.
4.
Press
to adjust Warn-Away zone
Siren chirps 1 time.
Warn-away Zone adjustment has now been entered.
Warn-away Zone can now be adjusted.
5.
Adjust Warn-away Zone
Press
Press
The sensor Warn-away zone can be tested at any time during adjustment
and will generate 1 siren chirp each time the zone is activated.
6.
Press
of the remote control to return to Primary zone adjustment and lock
in Warn Away zone setting.
Siren chirps 2 times.
Primary zone can now be re-adjusted as described in step 3.
Or press
programming mode.
The siren will chirp 3 times when sensor adjustment mode has been exited.
A A u u t t o o - - s s c c r r o o l l l l f f o o r r a a d d j j u u s s t t i i n n g g s s e e n n s s i i t t i i v v i i t t y y - press and hold
increase or decrease sensitivity setting several levels rapidly.
remote adjustable omnisensor
The Omnisensor is designed for ease of adjustment by the user and to give the ulti-
mate in impact detection without the possibility of false triggers that are common with
less sophisticated sensor.
Installing the omnisensor
The omnisensor can be located in either the passenger or engine compartment. It must
be firmly mounted with the indicator arrow pointing UP to a vertical metal surface. For
best results it must be secured with sheet metal screws using ALL FOUR mounting points.
42
of the remote control to increase sensitivity.
of the remote control to decrease sensitivity.
to increase sensitivity.
to decrease sensitivity.
again to lock in primary zone setting and exit
3 times then
1 time).
or
to
www.directed.com
Hide quick links:
Advertisement
Table of Contents
