Blackjax Deactivation Sequence; Bypass Blackjax Temporarily (If On In Program Grid) - Clifford IntelliGuard 850 Installation Manual

5. If PIN code is NOT entered within 20 seconds:
System sounds siren and begins flashing parking lights.
Brake lights continue to flash.
The system will now immobilize as described in steps 6-7.
6. If system sees the RPM rate return to 1 ½ times programmed RPM rate or lower,
the system will immobilize the vehicle as described in step 7
7. Vehicle Immobilization:
immobilizer will engage the starter and ignition circuits.
The siren will continue to sound and the parking and brake lights will flash
for a maximum of 5 minutes.
Immobilization circuits will remain active until correct PIN code is entered.

blackjax deactivation sequence

To deactivate BlackJax turn the key on and then enter the PIN code at any time.

bypass blackjax temporarily (if On in program grid)

Bypass BlackJax temporarily
1. Turn ignition on.
2. Enter PIN code. Do not enter valet or programming mode.
3. Within 10 seconds: Press lock/unlock button of remote control.
4. Siren chirps 1 time as confirmation of BlackJax bypassed.
5. Turn Ignition Off, siren chirps 3 times as confirmation of exiting programming.
N N O O T T E E : : If ignition remains on after entering PIN code and no action for 10 seconds,
unit will automatically exit programming mode without chirps.
To return to normal BlackJax Operation
1. Turn ignition on.
2. Enter Pin code.
3. Within 10 seconds: Press lock/unlock button of remote control.
4. Siren chirps 2 times as confirmation of BlackJax active.
5. Turn ignition off, siren chirps 3 times as confirmation of exiting programming.
N N O O T T E E : : If ignition remains on after entering PIN code and no action for 10 seconds,
unit will automatically exit programming mode without chirps.
40
www.directed.com