Type B: Negative-Triggered, Relay-Driven System - Clifford IntelliGuard 850 Installation Manual

type B: negative-triggered, relay-driven system

I I M M P P O O R R T T A A N N T T ! ! The H2/1 and H2/6 wires are not required for wiring the door locks.
For detailed wiring instructions for these two wires, refer to the beginning of the Door
Lock Harness (H2) Wire Connection Guide section. Depending on the type of door
lock system, there may be additional H2 harness wires that are not used for wiring the
door locks.
H2/1
#30
H2/2
#87
#87A
ON-BOARD
LOCK
RELAY
H2/3
H2/4
#30
#87
H2/5
#87A
ON-BOARD
LOCK
H2/6
RELAY
DIA-627
© 2004 directed electronics, inc.
WHITE/BLACK
LOCK #87A NORMALLY CLOSED
GREEN/BLACK
LOCK #30 COMMON (OUTPUT)
VIOLET/BLACK
LOCK #87 NORMALLY OPEN (INPUT)
BROWN/BLACK
UNLOCK #87A NORMALLY CLOSED
BLUE/BLACK
UNLOCK #30 COMMON (OUTPUT)
VIOLET
UNLOCK #87 NORMALLY OPEN (INPUT)
SWITCH
LOCK UNLOCK
NOT USED
VEHICLE (-)
LOCK TRIGGER
CIRCUIT
TO CHASSIS
15A
GROUND
NOT USED
VEHICLE (-)
UNLOCK TRIGGER
CIRCUIT
TO FACTORY
RELAYS
13