Type A: Positive-Triggered, Relay-Driven System - Clifford IntelliGuard 850 Installation Manual

type A: positive-triggered, relay-driven system

I I M M P P O O R R T T A A N N T T ! ! The H2/1 and H2/6 wires are not required for wiring the door locks.
For detailed wiring instructions for these two wires, refer to the beginning of the Door
Lock Harness (H2) Wire Connection Guide section. Depending on the type of door
lock system, there may be additional H2 harness wires that are not used for wiring the
door locks.
H2/1 WHITE/BLACK
LOCK #87A NORMALLY CLOSED
#30
GREEN/BLACK
H2/2
#87
LOCK #30 COMMON (OUTPUT)
#87A
ON-BOARD
LOCK
RELAY
VIOLET/BLACK
H2/3
LOCK #87 NORMALLY OPEN (INPUT)
H2/4
BROWN/BLACK
UNLOCK #87A NORMALLY CLOSED
#30
BLUE/BLACK
#87
H2/5
UNLOCK #30 COMMON (OUTPUT)
#87A
ON-BOARD
LOCK
RELAY
VIOLET
H2/6
UNLOCK #87 NORMALLY OPEN (INPUT)
DIA-626
12
FACTORY LOCK
SWITCH
LOCK
NOT USED
VEHICLE (+)
LOCK TRIGGER
CIRCUIT
VEHICLE FUSED
+12 VOLT CONSTANT
15A
NOT USED
VEHICLE (+)
UNLOCK TRIGGER
CIRCUIT
TO FACTORY
RELAYS
www.directed.com
UNLOCK