Section 6-Back/Seat; Folding/Unfolding Back Assembly - Invacare Compass SPT PH904A Owner's Operator And Maintenance Manual

SECTION 6—BACK/SEAT
After adjustments and before use make sure all attaching hardware is securely
tightened.

Folding/Unfolding Back Assembly

NOTE: For this procedure, refer to FIGURE 6.1.
NOTE: When folding or unfolding the back, make sure the back release cord does not get caught in
the release latches.
1. To unfold the back, push/pull the back towards rear of wheelchair until it locks in
place.
The back MUST be locked securely in place before using the wheelchair.
2. To fold the back, pick up on the back release cord and push the back towards the front
of the wheelchair.
Release
Latch
Part No 1122134
WARNING
WARNING
Back
Release
Cord
FIGURE 6.1 Folding/Unfolding Back Assembly
47
SECTION 6—BACK/SEAT
Compass™SPT™