As part of the ongoing improvement of the products, Invacare Rea AB reserves the right to modify existing models at any time. Any use of this publication, or parts thereof, as well...
Jemima or nylon. The padded seat is made of nylon. This manual includes a description of the parts of the chair, ® simple adjustment options, how to use the Invacare Spin safely and how to transport it. The manual must be read thoroughly before the chair is used.
This symbol means warning. On this page a number of points affecting your personal safety are shown. Please Read it carefully! Invacare is only responsible for product changes carried out by per- ® sonnel who we authorise. We reserve the right to make any changes to equipment and specifications without prior notice.
Daily performance check Check that the following parts are securely fitted on the wheelchair CPF QRGTCVKQPCN 9JGGNU $CEMTGUV #PVKVKR FGXKEG 2WUJ JCPFNGU (QQVTGUVU $TCMGU ® INVACARE SPIN...
Upholstery and frame colours Upholstery Black Nylon TR33, Black Jemima TR18 Frame colours Blue, Red, Black, Grey (Limegreen and orange as special) Equipment and accessories Invacare® Spin has a wide range of accessories and options. Backrest Slingtype Tension adjustable Backrest bar...
See section "Test report from dynamic safety restraint test", for test configuration. Wheelchair users should however transfer to the vehicle seat and use the vehicle installed restraint system whenever it is feasible ** For seat widths 48 and 50,5 cm the maximum user weight is 135 kg. ® INVACARE SPIN...
Make sure that the back- rest is securely locked. Be careful not to trap your fingers in the backrest links. 3. Unfold the wheelchair. Be careful not to trap your fingers between seat and frame tube. INVACARE ® SPIN...
Page 9
Lock the legrests by turning them inwards. The legrests are automatically locked so there is no risk of them coming off the wheelchair. Be careful not to trap your fingers between frame and legrest. ® INVACARE SPIN...
Then retighten the screw. NOTE! Don't touch the upper screw (C). The distance between the lowest part of the footrest and the ground must be at least 40 mm. 6QQNU OO #NNGP -G[ INVACARE ® SPIN...
6QQNU OO #NNGP -G[ The footrest can be flipped up. Lift the left side of the footrest upwards. Be careful not to trap your fingers between the footrest and the reciever when folding it down. ® INVACARE SPIN...
2WNN DCEM VJG UGCV U WRRGT UGEVKQP UQ VJCV VJG adjustable Velcro straps are visible. Use these straps to adjust the shape of the seat. Always have a cushion on the seat when testing its adjusted shape. INVACARE ® SPIN...
NOTE! Don't touch the lower screws (D). When you have fitted the backrest in the cor- rect position, it is important that you check thoroughly that the screws are tightened securely. This is important for your own safety! 6QQNU OO #NNGP MG[ ® INVACARE SPIN...
Page 14
Velcro straps. When you loosen the backrest, the tip-risk increases. We recommend the use of anti-tip devices. 4. Please observe that the backrest bar may not be used for lifting the chair! INVACARE ® SPIN...
Page 15
Adjust the rear wheels to a stable position. We recommend the use of anti-tip devices. Make sure that the backrest is safely secured. 6QQNU OO #NNGP MG[ ® INVACARE SPIN...
4. To adjust the depth of the mudguard, unscrew 5 mm Allen key screws (D) using an Allen key. Remove the nuts (E) on the reverse side. Move the mudguard into the required position and fasten the screws again. INVACARE ® SPIN...
3. To obtain lower seat heights, the clamp (D) can be mounted upside down (pic 3). Always make sure that the arrow (E) and the line (F) is pointing upwards, when mounting the rearwheel attachment. Do not try to loosen nut (G)! ® INVACARE SPIN...
Page 18
When you have fitted the wheels in the cor- rect position, it is important that you check thoroughly that the nuts and screws are 6QQNU OO #NNGP -G[ tightened securely. This is important for your own safety! INVACARE ® SPIN...
° ° Do not loosen screw B more than 5 turns. The ° corresponding nut will then come loose and fall out of the castor housing. 6QQNU OO #NNGP MG[ ® INVACARE SPIN...
(A) upwards. Then release the handle. 3. 4GNGCUG VJG DTCMGU RWNN VJG JCPFNG WRYCTFU CPF the lock catch will release automatically. Incorrect adjustments or use of the brake can reduce the effectiveness of the brake. INVACARE ® SPIN...
For safety reasons we recommend the Never forget to fold down the anti-tip devices use of two anti-tip devices! or the wheelchair may tip over. ® INVACARE SPIN...
Page 24
All manuals and user guides at all-guides.com 22" Passive rear wheel fixation H mm X° X" pos. pos. pos. pos. pos. - = Not applicable INVACARE ® SPIN...
Page 25
All manuals and user guides at all-guides.com 24" Passive rear wheel fixation. - = Not applicable H mm X° X" pos. pos. pos. pos. pos. ® INVACARE SPIN...
2. When hole (A) is visible, just above the attachment, the handle will be in the right “locking-position”. Make sure the push handles is securely locked before use. PELVIC BELT The pelvic belt is mounted on the brackets placed at the rear of chassis (Pic 1). INVACARE ® SPIN...
All manuals and user guides at all-guides.com Transport When you are transporting the Invacare ® Spin can easily remove certain parts to make the chair smaller and lighter. 1. Start by removing the armrests. Flip up armrests Press the button (A), swing up the armrest.
® ® The Invacare Spin has been tested for safety in collisions according to ISO 7176-19. The Invacare Spin can be used for transport in vehicles that have been specially adapted for this purpose. The wheelchair must be securely fastened in the vehicle according to the methods described on the following page. Remember that the best solu- tion is always to move the user from the wheelchair into a normal car seat.
Page 29
Spin with passive rear wheel fixation has been tested for safety in collisions according to ISO ® 7176-19. The Invacare Spin with passive rearwheel fixation can be used for transport in vehicles that have been specially adapted for this purpose. The wheelchair must be securely fastened in the vehicle according to the methods described on the following page.
C. Pelvic belt and 3-point safety belt 1. Check that the pelvic belt is correctly attached to the wheelchair, adjust the length and fasten it around the user. 2. Fasten the 3-point safety belt around the user.. ® INVACARE SPIN...
Try to propel down the slope in a straight line as much as possible. Never change direction when propelling down a slope. Never propel up or down a slope crosswise. INVACARE ® SPIN...
Page 33
Assistants must remember not to hold removable armrests or legrests. In addition, assistants should remember to lift correctly, using their legs and keeping their backs as straight as possible. ® INVACARE SPIN...
The address and telephone number are on the back cover of the manual. %JGEM CNN RCTVU QH VJG YJGGNEJCKT QPEG C YGGM +H [QW FKUEQXGT FCOCIG RNGCUG contact Invacare immediately. The address and telephone number are on the back cover of this manual.
6[TGU CPF VWDGU CTG OCFG QH TWDDGT CPF ECP DG TGE[ENGF CEEQTFKPI VQ CDQXG Packing All Invacare Rea AB packing material is developed to fit the products in an optimal way to reduce unnecessary waste in material. All boxes are recyclable.