Adjusting The T-Arms; Adjusting T-Arm Height - Invacare Compass SPT PH904A Owner's Operator And Maintenance Manual

Adjusting The T-Arms

Adjusting T-Arm Height

NOTE: For this procedure, refer to FIGURE 5.4.
1. Unlock the T-Arm by flipping the T-Arm release lever towards the inside of the
wheelchair.
NOTE: If necessary, pull the T-Arm release lever out and rotate 180° so it can be flipped towards
the outside of the wheelchair.
2. Slide the T-Arm to one of:
A. Low Height T-Arms - Nine positions.
B. High Height T-Arms - Seven positions.
3. If the inside T-Arm post does not slide up and down in the outside T-Arm post as
desired, perform one of the following:
• Tighten - Tightening the set screws on the outside T-Arm post will make it more
difficult to move the inside T-Arm post up and down.
• Loosen - Loosening the set screws on the outside T-Arm post will make it easier to
move the inside T-Arm post up and down.
4. Lock the T-Arm by flipping the T-Arm release lever towards the front of the
wheelchair.
Set Screws
Part No 1122134
T-Arm
INSIDE T-Arm Post
T-Arm Release
Lever - LOCKED
Position
Outside T- Arm Post
FIGURE 5.4 Adjusting T-Arm Height
43
SECTION 5—ARMS
T-Arm Release Lever -
UNLOCKED Position
Compass™SPT™