Retrieving Messages; Using A Headset - Inter-Tel ENDPOINT 8690 User Manual

Retrieving Messages

To retrieve a message (Message Indicator lamp is flashing):
Lift the handset and press
message center that left the message. (See
your mailbox.)
To select the message you want to answer first:
With the handset in the cradle, press the
1.
the waiting message. If more than one message is waiting, scroll to the desired
message using the
arrow) or low (down arrow) end of the
Press the
2.
To cancel a waiting message:
Press
1. Message
canceled.
Press
2.

Using a Headset

With an electret headset, you can talk on the endpoint handsfree, without using your
speaker and microphone.
NOTE:
If your headset has a power-saver mode, make sure the system administrator
has the Headset Connect Tone flag enabled in the telephone system. If this flag is not
enabled, you may miss the first few seconds of incoming calls.
To connect a headset:
Insert the headset plug into the headset jack.
1.
With the handset in the cradle, dial
2.
dial
SET MODE ON.
NOTE:
If using a headset, press Speaker to connect and disconnect calls.
To disconnect a headset:
Unplug the headset cord from the headset jack.
1.
With the handset in the cradle, dial
2.
dial
SET MODE OFF.
NOTE:
If you have both a headset and a handset connected to your endpoint and you
are using the headset, you can quickly transfer audio to the handset by lifting the hand-
set from the cradle. Press Speaker to transfer the call back to the headset before
replacing the handset in the cradle.
®
Inter-Tel Model 8690 User Guide (ITP Mode)
Message
PREVIOUS
menu button to respond to the desired message.
REPLY
or the
VIEW MESSAGE
or the menu button to cancel the displayed message.
DELETE
*
(Headset On/Off feature code). The display shows HEAD-
3 1 7
(Headset On/Off feature code). The display shows HEAD-
3 1 7
. A call is automatically placed to the endpoint or
page 29 for information about accessing
VIEW MESSAGE
or menu buttons or press the high (up
NEXT
button.
Volume
menu button to view the message to be
(Headset On feature code) or
3 1 5
(Headset Off feature code) or
3 1 6
menu button to view
25