Redialing A Number; Running Feature Code Favorites - Inter-Tel ENDPOINT 8690 User Manual

Redialing a Number

The Redial feature displays the last five outgoing calls (from the call log) as buttons
containing information about the call. You can press one of the buttons to place a
return call.
To redial a number:
Press
1. Unified Communicator
Press
2. Redial
Press one of the five buttons in the list. The Call dialog box appears.
3.
Select from any of the following options:
4.
• Press one of the numbers in the list to initiate a call to that number.
• Press
account's call routing rules to route the call to the appropriate location. This
option is only available if the contact is linked to an account, and the account
has at least one device associated with it.
• If the contact is linked to an account with at least one device, or if the contact
is linked to a device, there will be two additional options in the popup menu:
Voicemail and Leave Message. Press
given person/device. Press
the given person/device. If you leave a station message, the station message
is left at the current location, or it is left at the primary device if the current
location is not a UC device.

Running Feature Code Favorites

NOTE:
You must use the Web Client to set up your Favorites list.
The Favorites button displays a list of feature code favorites for each device you own.
To run a feature code favorite:
Press
1. Unified Communicator
Press
2. Favorites
Press the feature code you want to run.
3.
NOTE:
Some feature codes may require additional input on the display.
100
on the endpoint display.
. The Redial dialog box appears.
to place a call to the account's primary device, allowing the
Find Me
Leave Message
on the endpoint display.
. The Feature Code Favorites dialog box appears.
to call the voice mail of the
Voicemail
to leave a station message for
®
Inter-Tel Model 8690 User Guide (ITP Mode)