Endpoint Connectors - Inter-Tel ENDPOINT 8690 User Manual

Endpoint Connectors

Your Model 8690 endpoint has various connectors that are required for an IP end-
point. Two light-emitting diodes (LEDs) on the PC ports and LAN/Power jack indi-
cate link status and the speed of the connections.
The ports and connectors on the Model 8690 endpoint include the following:
•
External Microphone Jack: Allows you to connect an external microphone to
the endpoint.
•
External Speaker Jack: Allows you to connect an external speaker to the end-
point.
•
Reset Button: Resets the connection to the network.
•
Compact Flash (CF) Port: Allows you to connect a CF memory card if addi-
tional memory is needed.
•
Personal Computer Memory Card International Association (PCMCIA)
Port: Allows you to connect a PCMCIA memory card if additional memory is
needed.
•
LAN/PWR Jack: Connects the endpoint to a network hub/switch and the power
supply.
•
Universal Serial Bus (USB) Client Port: Connects the endpoint to a host com-
puter running ActiveSync
•
USB Host Port: Allows you to connect a keyboard, mouse, or other USB device
to your endpoint.
•
Three PC Ports: Allows you to connect your PC or any other 10/100 Ethernet
device to your endpoint.
PCs 1, 2, and 3
4
®
.
Back
MIC SPKR
LEDs
USB CLIENT USB HOST
LAN/PWR
RESET BUTTON
PCMCIA CF
®
Inter-Tel Model 8690 User Guide (ITP Mode)