Advanced Setup; Speaker Setup - Integra DTR-8.8 Instruction Manual

Advanced Setup

Speaker Setup

This section explains items on the Speaker Config menu.
Some of the speaker settings are set automatically by the
Automatic Speaker Setup function (see page 55).
/
Input Selector
Macro
1 2
Remote Mode
DVD VCR
CDR/MD/Dock
TV Cable
SAT
Dimmer
+
Enter
CH
Enter
Disc
Album
-
Setup
Prev
CH
Display
Rec Playlist
Listening Mode
Speaker Settings
See "Speaker Settings" on page 47.
Speaker Configuration
These settings are set automatically by the Automatic
Speaker Setup function (see page 55).
With the Speaker Configuration settings, you can specify
which speakers are connected and a crossover frequency
for each speaker.
The following crossover frequencies can be specified:
Full Band, 40 Hz, 45 Hz, 50 Hz, 55 Hz, 60 Hz, 70 Hz,
80 Hz (THX), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 130 Hz,
150 Hz, or 200 Hz.
Specify Full Band for speakers that can output low-fre-
quency bass sounds adequately, for example, speakers
with a good sized woofer. For smaller speakers, specify
a crossover frequency. Sounds below the crossover fre-
quency will then be output by the subwoofer instead of
the speaker. Refer to your speakers' manuals to deter-
mine the optimum crossover frequencies.
If you're using THX-certified speakers, specify
80 Hz (THX) for all speakers.
3 Zone 3
CD Zone 2
Receiver
Net/USB Receiver
Tape/AMP
Sleep
VOL
Muting
Random
1 Press the [Receiver] Remote
Mode button, followed by the
Receiver
[Setup] button.
The main menu appears onscreen.
2 Use the Up and Down [
buttons to select "2. Speaker
Setup," and then press [Enter].
Enter
The Speaker Setup menu appears.
2.Speaker Setup
1.Speaker Settings
2.Speaker Config
3.Speaker Distance
4.Level Calibration
Enter
5.Equalizer Settings
6.THX Audio Setup
3
Use the Up and Down [
buttons to select "2. Speaker
Config," and then press [Enter].
Enter
The Speaker Config screen appears.
2-2.Speaker Config
Subwoofer
Front
Center
Enter Surround
Surr Back
Surr Back Ch
LPF of LFE
Double Bass
4 Use the Up and Down [
buttons to select "Subwoofer,"
and then use the Left and Right
Enter
[ ]/[ ] buttons to select:
Yes: Select if a subwoofer is con-
nected.
No: Select if no subwoofer is con-
nected.
Enter
]/[ ]
]/[ ]
Yes
Full Band
100Hz
100Hz
100Hz
2ch
120Hz
On
]/[ ]
101