Advanced Operations; Advanced Setup; On-Screen Setup Menus; Common Procedures In Setup Menu - Integra DTR-70.3 Instruction Manual

Advanced Operations

Advanced Setup

The on-screen menus appear only on a TV that is
connected to the HDMI OUT MAIN. If your TV is
connected to other video outputs, use the AV
receiver's display when changing settings.
This section describes the procedure for using the
remote controller unless otherwise specified.

On-screen Setup Menus

MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Input/Output Assign
(➔ page 46)
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
5. Analog Audio Input
Speaker Setup
page 49)
(➔
2. Speaker Setup
1. Speaker Settings
2. Speaker Configuration
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
Audio Adjust
(➔ page 53)
3. Audio Adjust
1. Multiplex/Mono
2. Dolby
3. DTS
4. Audyssey DSX
5. Theater-Dimensional
6. LFE Level
7. Direct
8. Sound Program Edit
Source Setup
(➔ page 56)
4. Source Setup
1. Audyssey
2. IntelliVolume
3. A/V Sync
4. Name Edit
5. Picture Adjust
6. Audio Selector
Listening Mode Preset
(➔ page 61)
5. Listening Mode Preset
1. BD/DVD
2. VCR/DVR
3. CBL/SAT
4. GAME
5. PC
6. AUX
Miscellaneous
(➔ page 62)
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
5. 12V Trigger C Setup
Hardware Setup
page 63)
(➔
7. Hardware Setup
1. Remote ID
2. Multi Zone
3. Tuner
4. HDMI
5. Auto Standby
6. Network
7. Firmware Update
Remote Controller
Setup (➔ page 78)
8. Remote Controller Setup
1. Remote Mode Setup
2. Activities Setup
Lock Setup
(➔ page 67)
9. Lock Setup
Setup

Common Procedures in Setup Menu

Enter
/ / /
Setup
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver's
various settings. Settings are organized into 9 categories
on the main menu.
Carry out the settings by using the on-screen display.
1 Press Receiver followed by Setup.
Tip
• If the main menu doesn't appear, make sure the appropriate
external input is selected on your TV.
2
Use / to select a menu, and then press Enter.
3
Use / to select a target, and then press Enter.
4
Use / to select an option, and use
the setting.
Press Setup to close the menu.
Press Return to return to the previous menu.
Note
• This procedure can also be performed on the AV receiver by
using Setup, the arrow buttons, and Enter.
®
• During Audyssey MultEQ XT32 Room Correction and
Speaker Setup, messages, etc., that are displayed on the TV
screen will appear in the Display.
Explanatory Notes
Main Menu
■
Subwoofer
1ch:
The audio signal is outputted from
SW/SUBWOOFER 1 jack only.
2ch:
The audio signal is outputted from
SW/SUBWOOFER 1 and 2 jacks.
Menu selection
Setting target
Setting options (default setting underlined)
Receiver
Return
/ to change
Speaker Setup
En
45