Integra DTR-8.8 Instruction Manual page 31

Connecting Your Components—Continued
■ HDMI Monitor Setting Set to No
With the HDMI Monitor setting set to No (see
page 48), video input signals flow through the
AV receiver as shown, with composite video
and S-Video sources being upconverted for the
component video output. Use this setting if
you connect the AV receiver's COMPO-
NENT VIDEO MONITOR OUT 1 or COM-
PONENT VIDEO MONITOR
OUT 2/ZONE 2 OUT to your TV.
Composite video is upconverted to S-Video
and S-Video is downconverted to composite
video. Note that these conversions only apply
to the MONITOR OUT V and S outputs, not
the VCR/DVR OUT V and S outputs.
The composite video, S-Video, and component
video pass through their respective input sig-
nals as they are.
This signal flow also applies when the Monitor
Out Resolution setting is set to Through (see
page 48).
Video Signal Flow and the Resolution Setting
When the HDMI Monitor setting is set to No
(see page 48), if the Monitor Out Resolution
setting is set to anything other than Through
(see page 48), the video signal flow will be as
shown here, with composite video and S-Video
sources being upconverted for the component
video output.
The composite video, S-Video, and component
video outputs pass through their respective
analog input signals as they are. HDMI input
signals are not output.
Audio Connection Formats
Audio equipment can be connected to the AV
receiver by using any of the following audio
connection formats: analog, optical, coaxial,
analog multichannel, or HDMI.
When choosing a connection format, bear in
mind that the AV receiver does not convert dig-
ital input signals for analog line outputs and
vice versa. For example, audio signals con-
nected to an optical or coaxial digital input are
not output by the analog TAPE OUT.
Note:
• Net/USB sources are not output digitally.
Video Signal Flow Chart
DVD player, etc.
Composite
AV receiver
Composite
TV, projector, etc.
Video Signal Flow Chart
DVD player, etc.
Composite
AV receiver
Composite
TV, projector, etc.
Audio Signal Flow Chart
DVD player, etc.
HDMI
AV receiver
HDMI
1, 3
1 Depends on the HDMI Audio Out setting (see page 114).
MD recorder, etc. *
2 Only the front L/R channels are output.
*
3 Net/USB sources are not output.
*
S-Video Component
IN
MONITOR OUT
S-Video Component
S-Video Component
IN
MONITOR OUT
S-Video Component
Optical Coaxial Analog Multichannel
2
Optical Analog
3
HDMI
HDMI
HDMI
31