Using The Listening Modes; Selecting The Listening Modes - Integra DTR-8.8 Instruction Manual

Using the Listening Modes

Selecting the Listening Modes

For a description of each listening mode, see "About the
Listening Modes" on page 93.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial, optical, or HDMI).
• The listening modes you can select depends
on the format of the input signal. To check
the format, see "Displaying Source Informa-
tion" on page 84.
• While a pair of headphones is connected,
you can only select the Mono, Direct, or Ste-
reo listening mode.
Selecting on the AV Receiver
Stereo
■ [Stereo] button
This button selects the Stereo listening mode.
■ Listening Mode [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
88
Listening Mode
]/[ ] buttons
Selecting with the Remote Controller
+
CH
Disc
Album
-
Prev
CH
Display
Rec
Surround
Stereo
Stereo Surround
Repeat Audio
Test Tone CH Sel
Direct
Open/Close Video Off
Audio Sel
■ [Stereo] button
This button selects the Stereo listening mode.
■ [Surround] button
This button selects the Dolby Digital and DTS listen-
ing modes.
■ Listening Mode [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
■ [Direct] button
This button selects the Direct listening mode.
■ [THX] button
This button selects the THX listening modes.
■ [All ST] button
This button selects the All Channel Stereo listening
mode.
Enter VOL
Muting
Playlist Random
,
Listening Mode
Subtitle Play Mode
All ST
Direct THX All ST
Level- Level+
THX
L Night Re-EQ
VCR DVD HDD
RC- 688 M
]/[ ] buttons