Integra DTR-8.8 Instruction Manual page 10

Getting to Know the AV Receiver—Continued
E
Zone 3 indicator (128)
Flashes when Zone 3 is being set. Lights up when
Zone 3 is on.
F
Remote-control sensor (15)
Receives control signals from the remote controller.
G
Stereo button (88)
Selects the Stereo listening mode.
H
Listening Mode [
Select the listening modes.
I
Display
See "Display" on page 11.
J
Dimmer (RT/PTY/TP) button (66, 83)
Adjusts the display brightness.
On models other than the North American model,
this is the RT/PTY/TP button, and it's used with
RDS (Radio Data System). See "Using RDS (not
North American model)" on page 65.
K
Memory button (82)
Used when storing or deleting radio presets.
L
Tuning Mode button (63)
Selects the Auto or Manual tuning mode for AM
and FM radio.
M
Display button (84)
Displays various information about the currently
selected input source.
N
Setup button
Opens and closes the onscreen setup menus, which
are displayed on the connected TV.
O
Tuning, Preset, Arrow, and Enter buttons
When AM or FM is selected, the Tuning [
buttons are used for radio tuning, and the Preset
[ ] [ ] buttons are used to select radio presets
(see page 82). With the onscreen setup menus, they
work as arrow buttons and are used to select and set
items. The Enter button is also used with the
onscreen setup menus.
P
Master Volume control (62)
Sets the volume of the AV receiver to –∞ dB,
–81.5 dB, –81.0 dB through +18.0 dB (relative dis-
play).
The volume level can also be displayed as an abso-
lute value. See "Volume Setup" on page 111.
Q
Zone 2, Zone 3, Level [
buttons (128, 129)
The Zone 2 button is used when setting Zone 2.
The Zone 3 button is used when setting Zone 3.
The Level Up and Down [
when adjusting the volume level of Zone 2 or
Zone 3.
The Off button is used to turn off Zone 2 or Zone 3.
10
]/[ ] buttons (88)
] [
]/[ ], and Off
]/[ ] buttons are used
R
Phones jack (84)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
S
HDMI Out (49)
Used to set the HDMI Monitor setting.
T
USB port
A USB mass storage device, such as a USB flash
drive or MP3 player, containing music files (MP3,
WMA, WAV, M4A) can be plugged in here and the
music selected and played through the AV receiver.
U
Audio Selector button (85)
Selects the audio input: analog, digital, HDMI, or
multichannel.
V
Tone, Plus [+], and Minus [–] buttons (87,
129)
Used to adjust the tone (bass and treble), and the
volume and balance of Zone 2 and Zone 3.
W
Input selector buttons (62)
Select the following input sources: DVD,
VCR/DVR, CBL/SAT, Game/TV, AUX 1, AUX 2,
Tape, Tuner, CD, Phono, Net/USB.
X
Return button
Selects the previously displayed onscreen setup
menu.
Y
Setup Mic (55)
The automatic speaker setup microphone connects
here.
Z
AUX 2 Input (41, 95)
Used to connect a camcorder, game console, and so
on. There are input jacks for optical digital audio,
S-Video, composite video, and analog audio.
]