Integra DTR-8.8 Instruction Manual page 120

Net/USB—Continued
3 Press the [Net/USB] Remote
Mode button to select the
Net/USB remote controller mode.
Net/USB
4
Use the Up and Down [
buttons to select a USB mass
storage device, and then press
Enter
[Enter].
A list of the device's contents appears.
Enter
To open a folder, use the Up and Down
[
press [Enter].
5
Use the Up and Down [
buttons to select a music file, and
press the [Enter] or Play [
Enter
ton to start playback.
Playback starts and the following
screen appears.
Enter
or
To return to the previous menu during
playback, press the [Return] button.
To stop or pause playback, press the
Stop [ ] or Pause [ ] button, respec-
tively.
To select the next song, press the Next
[
the current song, press the Previous
[
song, press the Previous [
twice.
Random Playback
To play songs in random order, while playback is
stopped, press the [Random] button. All of the songs in
the current folder will be played in random order. When
all of the songs in the folder have been played once,
they'll all be played again in a different random order. To
cancel random playback, stop playback or return to the
song list.
120
USB Storage
1/15
Folder1
Folder2
01_Song_Track1.WMA
02_Song_Track2.WMA
03_Song_Track3.WMA
04_Song_Track4.WMA
05_Song_Track5.WMA
06_Song_Track6.WMA
07_Song_Track7.WMA
08_Song_Track8.WMA
]/[ ] buttons to select it, and then
PLAY
4/15
USB Storage
02_Song_Track2.WMA
00:10
WMA 160kbps 16bit/44.1kHz
RETURN
] button. To select the beginning of
] button. To select the previous
Random playback supports up to 9,999 songs per folder.
If a folder contains more than this, songs over 9,999 are
not included in random playback.
Repeat Playback
The Repeat function can only be set while the PLAY
screen is displayed.
To play songs repeatedly, during playback (or while
]/[ ]
playback is paused or stopped), press the [Repeat] button
repeatedly to select: ONE, FOLDER, ALL, or Off.
In ONE mode, the current song is played repeatedly.
In FOLDER mode, all of the songs in the current folder
are played repeatedly.
In ALL mode, all of the songs on the USB mass storage
device (in the same partition) are played repeatedly.
To cancel repeat playback, press the [Repeat] button
repeatedly to select Off.
Notes:
• If you connect a USB hard disk drive to the AV
receiver's USB port, we recommend that you use its
AC adapter to power it.
• The operation of hard disk drives that draw their
power from the AV receiver's USB port cannot be
]/[ ]
guaranteed.
• Do not connect the AV receiver's USB port to a USB
] but-
port on your computer. Music on your computer can-
not be played through the AV receiver in this way.
• The AV receiver supports USB MP3 players that sup-
port the USB Mass Storage Class standard, which
allows USB storage devices to be connected to com-
puters without the need for special drivers or software.
Note that not all USB MP3 players support the USB
--:--:--
Mass Storage Class standard. Refer your USB MP3
player's instruction manual for details.
• Protected WMA music files on an MP3 player cannot
be played.
• Onkyo accepts no responsibility whatsoever for the
loss or damage to data stored on a USB mass storage
device when that device is used with the AV receiver.
We recommend that you back up your important
music files beforehand.
• When you connect a USB MP3 player to the AV
receiver, what's shown on the AV receiver's display
may not match what's shown on the MP3 player's dis-
] button
play. Also, song management functions used by some
MP3 players, such as song genre, sort, additional
information, etc., cannot be used with the AV receiver.
• Operation with all USB mass storage devices includ-
ing the ability to power them is not guaranteed.
• Do not connect your USB mass storage device via a
USB hub. The USB mass storage device must be con-
nected directly to the AV receiver's USB port.
• If the USB mass storage device contains a lot of data,
the AV receiver make take a while to read it.