Camera Monitoring; Accessing The Camera - Panasonic BB-HCM311 Operating Instructions Manual

Operating Instructions
1

Camera Monitoring

1.1

Accessing the Camera

1.
Start up the web browser on your PC.
2.
Enter "http://IPv4 Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
• When port number is 80 (default), you do not need to enter port number.
See page 53 for details about port number.
• For IPv6 connection, see page 22 and page 23, and prepare the
requirements. Enter the "http://(IPv6-registered URL):Port Number" on
the address bar.
• If the camera image is not displayed, see page 7 and page 8 of the
Troubleshooting manual (for BB-HCM311) or page 48 and page 49 of the
Installation/Troubleshooting manual (for BB-HCM331) on the Setup CD-
ROM.
E.g. http://192.168.0.253:50000 (in IPv4)
3.
The Enter Network Password window is displayed, and enter the user name
and password that were set, and click [OK].
Note
When [Permit access from guest users] is set on the Security: Administrator
page, authentication window will not be displayed.
20
http:// .viewnetcam.com:50000 (in IPv6)