Operating Instructions
1
Camera Monitoring
1.1
Accessing the Camera
1.
Start up the web browser on your PC.
2.
Enter "http://IP Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
E.g. http://192.168.0.253:50000
•
When port number is 80 (default), you do not need to enter port number.
See page 34 for details about port number.
•
If the camera image is not displayed, see page 25 and page 26 of the
Installation/Troubleshooting guide.
3.
The Enter Network Password window is displayed, and enter the user name
and password that were set, and click [OK].
Note
When [Permit access from guest users] is set on the Security: Administrator
page, the authentication window will not be displayed.
8
(or http://
.viewnetcam.com:50000)