Using Upnp™ (Universal Plug And Play) - Panasonic BB-HCM311 Operating Instructions Manual

Operating Instructions
2.7 Using UPnP™ (Universal Plug and Play)
UPnP can automatically configure your router to be accessed from the Internet.
TM
In order to use this feature, your router needs to support this feature and it must be
enabled. Most router manufacturers disable this feature as the default setting. See
http://panasonic.co.jp/pcc/products/en/netwkcam/ for details and see your
router's manual for how to enable UPnP
router, set [Enable] for auto port forwarding.
Note
The camera's UPnP
1.
Click [UPnP] on the Setup page.
2.
Set up UPnP.
Setting
Auto Port
Forwarding
Display Shortcut
Icon in My
Network Places
70
does not support IPv6. Use this feature in IPv4.
TM
• If the network setting is [Static] or [DHCP], enabling auto
port forwarding allows you to access the camera from the
Internet.
Note
If the network setting is [Automatic Setup], enable [Allow
Access from the Internet] on the Network page (see page
53).
• Enabling it displays a shortcut to the camera in the My
Network Places folder.
Note
If you use Windows XP or Windows Me, this feature is
available. Enable UPnP
using this feature (see page 182).
. After the UPnP
TM
Description
Windows component before
TM
is enabled on the
TM