Browsing Pictures; Monitoring A Still Picture Of A Single Camera - Panasonic WV-NM100 Quick Reference Manual

BROWSING PICTURES

If the setup has been completed, you can browse through the pictures on the camera.
The pictures of the camera can be displayed as still pictures or motion pictures.
Displaying multiple pictures of multiple cameras on a screen is also possible. (Refer to "Monitoring Still Pictures of
Multiple Cameras" of WV-NM100 Operating Instructions in the supplied CD-ROM.)

Monitoring a Still Picture of a Single Camera

Set as follows to monitor a still picture (JPEG) of a single camera.
Preparations
The setting for still pictures can be made in the "Basic setup" page.
Screenshot 1
Begin the setup when the PC is in the same condition as just
after the startup.
Screenshot 2
The browser starts up. The web page set as the home page in
your browser appears.
(The picture is the page of the Panasonic web site.)
24
STEP1
Start up Internet Explorer on your PC.
STEP2
Enter the IP address assigned by the
"Panasonic IP Setup" software in the "Address"
box of Internet Explorer. (If the IP address has
not been assigned yet, enter the default IP
address "192.168.0.10".)
You can confirm the assigned IP address by
pressing the "REFRESH" button in the
"Panasonic IP Setup" window.
If the broadband router is set to use the address
translation, enter [IP address + : (colon) + port
number] in the "Address" box, and press the
enter key.