Boss Treadmill Upright Assembly Procedure
Please follow all steps in sequential order to assemble uprights over mounting
bracket located on frame.
You will need the following tools to perform this procedure:
Flat Blade Screwdriver.
1. During the assembly of the upright on Boss style units, you must raise the uprights into position
as shown in Figure 1.
2 While you are raising the uprights into place, pay attention to the mounting bracket located on the
frame. See Figure 2 for location of mounting bracket.
Figure 1: Upright Assembly
Figure 2: Mounting Bracket Location
3. Do not force the upright assembly into place if it catches on the side of this bracket.
Use a screwdriver and slightly pry open on the side of the upright to help assist over the mounting
bracket as shown in Figure 3.
Figure 3: Upright Assembly w/ Screwdriver
4. Continue treadmill assembly as detailed in Owner's Manual.
57