Overlay Removal And Installation - Keys Fitness Treadmill Service Manual

Treadmill Overlay Removal and Installation
Please perform these steps to remove and install new overlay on console assembly.
1. Use a box cutter or sharp object to lift one corner of overlay from console- See Step 1.
2.After corner is lifted, gently peel back the overlay from side to side. See Step 2 and 3.
STEP 1
STEP 2 STEP 3
3.Make sure the membrane is not removed while peeling back the overlay. If this occurs, hold down the
membrane while removing. See Step 4.
4. After overlay is removed, the console should look similar to Step 5.
5. Install new overlay on one side of console first as shown in Step 6.
STEP 5
STEP 4
STEP 6
6. After one side of overlay is stuck down on console, begin to smooth out by working the overlay from
one side to the other. Lightly apply pressure while overlay adheres to the console assembly. See Step 7 and
Step 8.
STEP 7
STEP 8
67