Keys Fitness Treadmill Service Manual page 3

POWER SOURCE INFORMATION
HOW TO PLUG IN THE POWER CORD
DANGER
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN
A RISK OF AN ELECTRICAL SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SER-
VICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUND-
ED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT. IF IT WILL NOT FIT THE
OUTLET, HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
THIS TREADMILL CAN BE SERIOUSLY DAMAGED BY SUDDEN VOLTAGE CHANGES IN YOUR
HOMES' ELECTRICAL POWER. VOLTAGE SPIKES, SURGES AND NOISE INTERFERENCE CAN
RESULT FROM WEATHER CONDITIONS OR FROM OTHER APPLIANCES BEING TURNED ON OR
OFF. TO REDUCE THE POSSIBILITY OF YOUR TREADMILL BEING DAMAGED, ALWAYS USE A
SURGE PROTECTOR (NOT INCLUDED) WITH YOUR TREADMILL.
SURGE PROTECTORS CAN BE PURCHASED AT MOST HARDWARE STORES AND DEPARTMENT
STORES. USE ONLY A UL LISTED SURGE PROTECTOR, RATED AT 15 AMPS, WITH A 14-GAUGE
CORD OF FIVE FEET OR LESS IN LENGTH. THIS TREADMILL MUST BE GROUNDED TO REDUCE
THE RISK OF ELECTRICAL SHOCK. GROUNDING PROVIDES A PATH OF LEAST RESISTANCE
FOR ELECTRIC CURRENT SHOULD THE TREADMILL MALFUNCTION. THIS PRODUCT IS PRO-
VIDED WITH A CORD HAVING AN EQUIPMENT-GROUNDING CONDUCTOR AND A GROUNDING
PLUG. ALWAYS PLUG THE POWER CORD INTO A SURGE-PROTECTOR, AND PLUG THE SURGE
PROTECTOR INTO AN APPROPRIATE OUTLET THAT IS PROPERLY INSTALLED AND GROUNDED
IN ACCORDANCE WITH ALL LOCAL CODES AND ORDINANCES.
3