Table of Contents
Advertisement
Anytime any maintenance or repairs are done (including clearing jams), FIRST:
1.
Disconnect the Nailer/Stapler from its air supply.
2.
Empty the Moveable Magazine (61) completely.
3.
Attempt to fire the Nailer into a piece of scrap wood to ensure that it is disconnected
and is incapable of firing any Brads/Staples.
4.
Wear ANSI-approved safety goggles, if not already doing so.
Use eye and ear protection when clearing jams. Always wear ANSI-
approved impact safety goggles and appropriate hearing protection.
1.
Occasionally, a Brad/Staple may become jammed in the firing mechanism of the
Nailer/Stapler, making the tool inoperable.
2.
To remove a jammed Brad/Staple, disconnect the tool from its air supply, lift the
Fixed Lever (53) and slide the Moveable Magazine (61) back until it locks in place.
Then, lean the Nailer/Stapler back.
3.
Remove all Brads/Staples from the Moveable Magazine (61). Then press the Fixed
Lever (53) and slide the Moveable Magazine (61) forward all the way, making sure
it locks in place.
4.
Attempt to fire the Nailer/Stapler into a piece of scrap wood to ensure it is discon-
nected and is incapable of firing any Brads/Staples.
5.
With the Driver Guide (62) facing away from you, remove the three Bolts (65). Then
remove the Safety Cover (66) and Driver Guide Cover (67) to expose the Driver
Guide (62).
6.
Remove the jammed Brad/Staple. Then replace the Driver Guide Cover (67), Safety
Cover (66), and three Bolts (65).
7.
Reload the tool with Brads/Staples. Then, reconnect the air supply hose to the
tool.
8.
Press the Driver Guide (62) against a piece of scrap wood, and test fire the Nailer/
Stapler several times while checking for proper operation. If the tool is properly firing,
you may continue using the tool. If the tool fails to perform properly, immediately
discontinue use and have the tool repaired by a qualified service technician.
9.
When finished working, disconnect the air supply. Remove the Brads/Staples. Then,
store the tool in a clean, dry, safe location out of reach of children.
For technical questions, please call 1-800-444-3353
SKU 95218
CLEARING JAMS
PAGE 9
Advertisement
Table of Contents
