Harbor freight tools central pneumatic series 2 in 1 flooring cleat staple nailer model 94446 assembly and operating instructions contractor series (12 pages)
Page 1
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Page 2
Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. SKU 90193 Specifications 1/4” NPT - 18 NPT...
Page 3
It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SKU 90193 Page 3...
Page 4
Unpacking When unpacking, check to make sure the parts listed on page 6 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Page 5
Immediately after finishing work, disconnect the Nailer from the air source. Maintenance 1. Wipe down the Nailer with a lint free cloth. 2. Make sure the Guide Box (#18) and the Air Inlet are free from any dirt or debris. Page 5 SKU 90193...
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 90193 Parts List Part No. Description...