Table of Contents
Advertisement
WARNING: Always wear ANSI-approved impact safety goggles when us-
ing, reloading, or performing any other maintenance on this tool. Other
people in the work area must also wear ANSI-approved impact safety gog-
gles.
Note: Do not mix brads and staples. Load the magazine with only one type.
1.
Lift the Fixed Lever (53) and slide the Moveable Magazine (61) back until it locks
in place.
DRIVER GUIDE (62)
2.
Place a full clip of the desired size Brads (5/8" to 2") or Staples (5/8" to 1-5/8") in
the Moveable Magazine (61). Up to 100 Brads or Staples may be loaded in front
of the Moveable Magazine.
3.
Slide the Moveable Magazine (61) forward, making sure the Fixed Lever (53) locks
in place.
For technical questions, please call 1-800-444-3353
SKU 95218
LOADING BRADS AND STAPLES
AIR INLET PLUG
TRIGGER
(32)
(78)
LOAD
BRADS OR STAPLES
HERE.
MOVEABLE MAGAZINE (61)
FIXED LEVER (53)
PAGE 7
Advertisement
Table of Contents
