Professional concrete “t” nailer (3/4” to 2-1/2”) (13 pages)
Summary of Contents for Central Pneumatic 93909
Page 1
Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. 97511 93909 . All rights reserved. No portion of this manual or any artwork ® ®...
Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 SPECIFICATIONS .113” to .131” Thick Shank, 2” to 3-1/2” Long; 21° Full Head...
Page 3
Harbor Freight Tools. 17. Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgement or reflexes are SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 Page 3...
Page 4
27. Hold tool away from head and body. During operation the Nailer may kick back causing injury. 28. Transport Nailer safely. Always disconnect air supply when moving the tool in the SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 Page 4...
Note: The amount of air pressure effects how deep the nails will be driven. It is suggested that you experiment on scrap material. Check the air connection for leaks and disconnect the Nailer. SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 UNPACKING OPERATION...
Do not load nails with the Trigger (44), or Bracket B (35), or Safety (38) depressed. (See Figure B) Pull the Feeder Shoe (52) all the way to the rear, until it latches. (See Figure B.) SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 Loading Nails REV 08h...
Page 7
With the nose of the Nailer on the workpiece, squeeze the Trigger again to fire another nail. Continue firing nails as needed. When the work is completed, disconnect the air supply and remove the nails from the nailer. SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 Loading Nails (continued) OPERATION Page 7...
Page 8
Test fire a nail, and check its depth of drive. Repeat Step #2 as necessary to achieve the desired depth of drive. (See Figure C). SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 EXHAUST COVER (4) (2-3/16” TO 3-1/2” LONG) QUICK COUPLER &...
Feeder Shoe (52) back into position. If you are unable to clear the nail jam using the method prescribed above, the tool should be taken to a qualified service technician for proper servicing. SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 RUBBER COVER (39) Clearing Jams...
When necessary, wipe with a damp cloth, using a mild detergent or mild solvent. When storing, keep the Framing Nailer in its Carrying Case (80) or covered with a clean cloth. SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 FIGURE D Probe in these areas with a screwdriver to release jammed nails.
Page 12
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 Page 12...