Clearing Jams - Central Pneumatic 93656 Assembly And Operating Instructions Manual

Air pin nailer
Table of Contents

Advertisement

Anytime any maintenance or repairs are done (including clearing jams),
1.
Disconnect the Nailer from the air hose.
2.
Empty the Magazine (57) completely.
3.
Attempt to fire the Nailer into a piece of scrap wood to ensure that it is disconnected
and is incapable of firing any pins.
4.
Always leave the Magazine (57) open during maintenance. The Magazine is

Clearing Jams

1.
Disconnect tool from air hose, empty the
Magazine (57) of pins, release any built-up air
pressure, and leave the magazine open, as
explained above.
2.
Hold the Nailer pointed away from you and any
other people or fragile objects. Remove the
Short Cap Screw (47) and the two longer Cap
Screws (46) - see Figure 2. Remove the Safety
Cover (45) and Safety Spring (49) and set them
aside.
3.
Remove the Safety Guide (50) carefully to avoid
bending the Safety (48) - see Figure 3.
4.
Remove the jammed pin. Pliers may be
necessary to remove a stuck pin.
5.
Inspect the Driver (11) for bends or breakage -
see location in Figure 4. If damaged, do not use
until Nailer repaired by a qualified technician.
6.
Lightly oil the Driver (11). Replace the Safety
Guide (50) underneath the Safety (48). The
Safety (48) should fit perfectly into the groove
in the Safety Guide (50). See Figure 3.
Replace the Safety Spring (49) onto the Safety
7.
(48) as in Figure 3. Carefully place the Safety
Cover (45) over the Safety and Spring and
attach using the Cap Screws (46) and the Short
Cap Screw (47) - see Figure 2. Make sure that
the Short Cap Screw (47) goes in the correct
position. Make sure that the Safety (48) is spring
loaded and moves freely, without sticking.
8.
Reload and reconnect Nailer to the air hose.
9.
Press the Safety (48) of the Nailer against an
appropriate piece of scrap wood.
10. Test fire the Nailer several times, checking for
proper operation.
11.
Disconnect the Nailer, remove the pins and store
it in a location out of children's reach.
SKU 93656
For technical questions, please call 1-800-444-3353.
FIRST:
Short Cap
Screw (47)
Driver
Guide (54)
FIGURE 4
FIGURE 2
Safety
Cover (45)
Cap
Screws (46)
FIGURE 3
Safety
Spring (49)
Safety (48)
Safety
Guide (50)
Safety (48)
Driver
Driver (11)
Guide (54)
Page 7

Advertisement

Table of Contents
loading

Table of Contents