Table of Contents
Advertisement
Chapter 8. Working with Events
If the MD Channel is set to All, the motion detection areas can be set to Set All or
Clear All.
Area
If an individual channel is set for MD, Area can be set to Set All, Clear All or Select
Area.
You can set one sensor for the channel selected, of you can select all sensors (of
16 possible sensors available).
Sensor
Select the sensor, and set it to either N.O. (Not Open) or N.C. (Not Closed), or the
setting can be Off.
Text
For text settings.
Setting the Area for Motion Detection
You can set a particular area for motion detection surveillance.
For example, if your camera points to the car dealership's car lot, you will prefer motion detection
around the cars themselves. You will be less interested in motion detection on the trees or light
poles that surround your lot. In this case, you can limit the Motion Detection (MD) zone around
the cars. To set your motion detection area:
1. From the Normal Event submenu, in the Area option, set Select Area.
2. For the Custom Area option, access the Custom Area grid, which shows 330 squares in a
22x15 representing the area your camera "sees."
3. Click a square to set it within your motion detection area. You can build up as large a detection
area as you wish, positioned in whatever area of the grid is appropriate.
· Each square turns gray when clicked and part of the detection area.
· Click any square to deselect it.
70
Digital Video Recorder
SVR-1670
Setting for Text Events
Option
Recording
You can turn recording for text input on or off.
Device
Select either one of VSI PRO, VSI Hydra and Manual.
Sync Text With
This selects channels to link with text data.
By defi ning a header here, the DVR can recognize from the header that it is the
start point of the data. Two headers can be set and detected because one device
can send various types of data to external receivers.
Seek Header
However, this parameter is needed to see how one unit of data out of continuously
incoming text data is structured. All data has its start and end points, and the
header is data that is always inserted to indicate the start point.
Header 1
and
Use the onscreen keyboard to enter the text you want displayed for the headers.
Header 2
The delimiter value will differ depending on the device used. For more information
Delimiter
on delimiters, refer to the user manual or the device manufacturer.
DelimiterLines defi ned below are the maximum number of text lines available
for one piece of data. Even though data is standardized, lengths might differ.
For example, three lines are programmed for client name input for an ATM, but
Timeout (ms)
if someone registers only his/her fi rst name and last name, only two lines are
provided when the person uses an ATM. However, the DVR cannot detect this
automatically, so Timeout is used to determine how long is needed to recognize the
received data as complete data after the last line is entered.
Lines
Defi ne the maximum number of lines for one piece of data.
External devices might not be recognized depending upon their particular features. Review
their product documentation or contact their manufacturer for information.
Digital Video Recorder
Setting
71
SVR-1670
Hide quick links:
Advertisement
Table of Contents
