Samsung SVR-1670 User Manual

Samsung SVR-1670 User Manual

Digital video recorder
Hide thumbs Also See for SVR-1670:
Table of Contents

Advertisement

Digital Video Recorder SVR-1670
User Guide
Before installing and operati ng this product,
please read this manual thoroughly.
ENGLISH
Firmware Version 1.2

Advertisement

Table of Contents
loading

Summary of Contents for Samsung SVR-1670

  • Page 1 Digital Video Recorder SVR-1670 User Guide Before installing and operati ng this product, please read this manual thoroughly. ENGLISH Firmware Version 1.2...
  • Page 2: Table Of Contents

    Product Warranty and Limits of Responsibility Table of contents Samsung does not accept any other responsibility concerning the sale of this product and does not Product Warranty and Limits of Responsibility ………………………………… 2 delegate any right to a third party to take any responsibility on its behalf. Product warranty does not Table of contents ………………………………………………………………...
  • Page 3: Table Of Contents

    12. 3 Monitoring …………………………………………………………… 95 To avoid fi re, explosion, malfunction or electric shock, observe these practices : - If the SVR-1670 cover ever needs to be opened, rely on qualifi ed personnel or system installers, who know 12. 4 Playback ……………………………………………………………… 98 how to do this safely.
  • Page 4: Cautions

    - For adequate ventilation, install the SVR-1670 with at least 6 in (15cm) of space between cooler fan and wall surface. recycling. Business users should contact their supplier and check the terms and conditions of the - Install on a fl...
  • Page 5: About The Svr

    • Video Recording Turkish, Russian, Swedish, Danish, Serbian, Rumanian, and Czech) The SVR-1670 stores video image data as high-resolution H.264 fi les at a maximum rate of 480 frames per - Easy fi rmware upgrade via USB or over the network.
  • Page 6: Package Contents

    Chapter 2. SVR-1670 Description 2. 3 Package Contents 2. 4 Front Panel Overview The front panel of the SVR-1670 has the following controls and indicators: Refer to the package contents diagram to ensure that all accessories are provided with your SVR- 1670.
  • Page 7: Rear Panel Overview

    2. 5 Rear Panel Overview AUTO Starts or stops user-defi ned sequences. Starts or stops a PTZ function. The rear panel of the SVR-1670 has the following connections: MONITOR Switches between the main and spot monitors. MENU Opens the on-screen display menu.
  • Page 8: The Remote Control

    2. 6 The Remote Control Name Function You can control all SVR-1670 features using the remote control device. You can also control multiple Selects the unique ID. SVR-1670s from one remote control device. This section explains how in these topics : FUNC Starts Function mode.
  • Page 9: Chapter 3. Hardware Installation

    Press the ID button on the remote controller and then the Channel button corresponding to the ID of the DVR. If the selection is successful, the DVR plays a beep and you can remote control the SVR-1670. To select an ID from 10 to 16, press +10 on the remote controller before the Channel button.
  • Page 10: Installing The Svr-1670 In A Rack

    · Solid wire : Strip 1/3 ~ 1/2 (8 ~ 10mm) of insulation off the end of the wire. Use AWG 20 ~ 26. 3. 1 Installing the SVR-1670 in a Rack To use the SVR-1670 safely, please install the SVR in a rack using the enclosed rack mounts. Follow these instructions to install the SVR-1670 in a rack.
  • Page 11 The following confi guration diagram depicts a basic sample confi guration that include cameras, example, if there are fi ve cameras connected to the SVR-1670 and the lowest channel number in use is monitors, sensors, and relays. These diagrams are representative only and are not intended to 6, then the SVR-1670 will set the video input type to match the camera connected to channel 6.
  • Page 12 Connect the D-SUB audio inputs as shown in Figure 3.3.7 Audio Input & Output Connection. 1. Ensure that the SVR-1670 is not connected to a live power source. 2. Using RCA audio cables or D-SUB cables, attach a microphone and speakers to the SVR-1670. Figure 3.3.7 Audio Input and Output Connections Figure 3.3.5 Connecting Audio to the SVR-1670...
  • Page 13: Extended Connections To The Svr-1670

    Figure 3.3.8 Connecting a Power Cord · To turn off the SVR-1670, press and hold the power button for 5 seconds, then choose “Yes” when the power-off dialog appears. · You can also unplug the power cable from the power outlet to turn off the SVR-1670.
  • Page 14 DC 3V output Connection method Insert stripped wire end into terminal block Connection method Connect stripped wire end with 15 pin D_SUB. 24V 1A Rated voltage 3.3 V Rated current 125V 0.5A Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 15 Connecting PTZ Cameras to the COM Ports Use RS-422 or RS-485 ports (COM2 or COM4). · PTZ cameras for the SVR-1670 can be connected through the COM port, and supported models confi gured through the onscreen display menu. Figure 3.4.11 COM2 Connection (RS-485)
  • Page 16: Remote Monitoring And Control

    Figure 3.4.13 External Device Connections 1. Turn off the SVR-1670. 2. Connect one end of the Ethernet cable to the SVR-1670 and the other end to a hub or router. 3. Turn on the SVR-1670. Figure 3.5.2 The Ethernet Connections...
  • Page 17: Hard Disk Drive Installation

    fi xture screws, as shown in the picture below. 4. Turn on the SVR-1670. To prevent damage to the SVR-1670, wait to turn the power on until after you have connected the Ethernet cable. 3. 6 Hard Disk Drive Installation This section describes how to work with a hard disk drive, in the following subsections : •...
  • Page 18 Figure 3.6.6 The SVR-1670 Connected with Maximum Number of HDDs 6. Close the upper cover on the SVR-1670, and then reconnect all devices that were removed for 3. To change to Enabled status, select the hard disk drive to connect and then press ESC to exit the hard drive installation.
  • Page 19 Removing a Hard Disk Drive To detach a hard disk drive, follow the instructions below: 1. Unplug the SATA and power cables. Remove the screws that connect the SVR-1670 main unit and the hard disk drive bracket. Figure 3.6.11 Removing Hard Disk Drive Now, it is time to confi...
  • Page 20: Chapter 4. Navigation: On-Screen Display And Function Menus

    4. 1 Working with the On-Screen Display Figure 4.1.1 The On Screen Display You will use the OSD to set up, confi gure and operate the SVR-1670. The section discusses how to Each menu has a gray title bar with submenus, demonstrated in Figure 4.1.2 : work with the OSD and covers the following topics : •...
  • Page 21 · Use the left/right or up/down arrow keys to choose characters. To go between options : · SVR-1670 Front : Use the left, right, up, and down buttons to move the cursor, · Use back arrow to backspace, and forward arrow to insert a space.
  • Page 22: Working With The Function Key Menu

    Understanding the Menu Structure Rewinds recorded video at half speed. Two types of function key menus are provided: Live Function and Playback Function. The Live Function menu controls various functions of the SVR-1670 while Playback Function controls Rewinds recorded video. video play options.
  • Page 23: Chapter 5. Quick Setup

    The language you want to display on menus and screens. Time Set the date and time by which the system is to run, record and timestamp data. Record Audio Set to On or Off. Figure 5.2.1 Schedule Submenu from Quick Setup Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 24: Setting The Date And Time

    Select Load if you want to load stored settings from USB storage. 5. Set the Time by entering data in each of the Date fi elds and in the Hour/Minutes/ Seconds To update the fi rmware version of the SVR-1670, connect a USB storage device to Firmware Update fi...
  • Page 25 You can update the fi rmware you are using for video access and management. 1. Insert a USB drive containing fi rmware update fi les to one of the USB ports on the SVR-1670. 2. Select Firmware Update from the System submenu.
  • Page 26: Using The Disk Options On The System Setup Menu

    Figure 6.2.1 Disk Submenu of the System Setup Menu - Selecting “No” cancels the removal and retains the HDD status as “O”. Figure 6.2.2 Disk Manager submenu on the System Setup Menu Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 27: Working With Passwords And Permissions

    · An “O” on any row in this column means all users have permission to use that feature. • The administrator has all permissions to use all functions of the SVR-1670. · An “X” on any row in this column means each user must have specifi c permission to use that •...
  • Page 28: Chapter 7. Communication To/From The Dvr

    2. A New Password submenu opens, in which you enter the new password. Setting Up for Ethernet · Enter the new password using either the number buttons on the SVR-1670’s front panel or the on-screen keyboard. This section discusses the options available if your Network Type is Ethernet.
  • Page 29 Setting up for xDSL This section discusses the options available if your Network Type is xDSL. Figure 7.1.2 Network Submenu for the Type xDSL (on the Network Setup Menu) Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 30: Registering With A Ddns Server

    · Enter a location. This can be any sort of word, phrase or code that makes sense to your business and situation. · Enter a description. This, too, can be any sort of word, phrase or code that makes sense to your business and situation. · Click the Registration button. Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 31 Log into iPOLiS and review the Product list, to verify that the Product List shows the DVR’s status as 'On'. Confi guring the DVR for DDNS Complete the dynamic IP address settings for the SVR-1670 following the instructions, and then confi gure the DDNS settings. Figure 7.2.6 iPOLiS Product List Showing “On” Status Figure 7.2.5 DDNS Submenu on the Network Setup Menu...
  • Page 32: Setting Up For Ntp Synchronization

    7. 4. Confi guring Remote Control Network Time Protocol (NTP) synchronizes time between devices on network. On a network, a server The SVR-1670 can be controlled remotely by various devices. provides the base time. The client systems receive the time from that server for synchronization.
  • Page 33: Setting Up Ip Filters

    7. 5 Setting up IP Filters Setting Serial Ports You can selectively block or allow IPs to access the SVR-1670. To set the serial port, fi rst select the COM (communication port) : ∙ COM1 and COM3 are fi xed to RS-232C ∙...
  • Page 34: Chapter 8. Working With Events

    You set up for event recording from the Event submenu of the Event Setup menu on the OSD. Figure 8.2.2 Schedule submenu on Event setup Figure 8.2.1 Event Submenu on the Event Setup Menu Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 35: Working With Normal Events

    Enables each channel or all channels to detect motion and notify users. Select one (Motion Detection) specifi c channel or set to All. Sensitivity Set to Lowest, 1~3, Highest or Off. Figure 8.2.4 Email Setup submenu Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 36 Defi ne the maximum number of lines for one piece of data. · Click any square to deselect it. External devices might not be recognized depending upon their particular features. Review their product documentation or contact their manufacturer for information. Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 37: Working With Presets

    8. 5 Working with Digital I/O Digital I/O are digital ports available for input and output at the same time. The SVR-1670 has 12 digital inputs and outputs, all of which can be set to either input or output : ∙...
  • Page 38: Defining Programs

    30fps for the D1 resolution. 1. Access the Program submenu, on the Record Setup menu of the OSD. About Recording Performance & Capacity Recording performance for the SVR-1670 is CIF 480fps for both Normal and Event Recording. Channels 1-8 Channels 9-16 ∙...
  • Page 39: Setting Up To Record

    ∙ the channels with events drop their Event frame rates settings to record the events. Pre Event Duration/ Set the Pre-Event Duration (1-5 seconds) and Post-Event duration (1-60 seconds) However, the SVR-1670 provides D1 30 compressed frames for all channels; it can record Post Event Duration for recording an event.
  • Page 40 TIP : Because the Index fi eld is never empty, be sure to double-check that you are deleting the appropriate index. When you click the Delete button, whatever Index is displayed in the Index fi eld will be deleted! Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 41: Chapter 9. Camera And Monitor Display Setup

    Color Select Color or B/W. AGC (Auto Gain Control) Set the automatic input range of video signals from a camera. Brightness and Contrast Adjust the brightness and contrast of a video. Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 42: Setting Up The Monitor Display

    To stop Auto Sequencing, press either button again. (This stops it from running; it does not of time you set (as the Dwell Time option). After each image displays in sequence, the rotation begins erase your settings.) again and plays continuously until you stop it. Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 43: Configuring Multi Display Layouts

    Set the order in which monitor images display in an auto sequence. Set the amount of time a monitor image displays before the next image in the auto Dwell Time sequence appears. Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 44 If the PTZ camera is connected to the DVR with the Samsung SPD protocol, you can confi gure the · To tilt the camera, press the up or down arrow key on the front panel or click the top or bottom camera using its console menu.
  • Page 45: Chapter 11. Working With Recorded Video

    To capture the playback to a USB memory, press PAUSE and then press AUTO Capture button on the front panel. Figure 11.2.1 Search Menu BookMark Press the PTZ button on the front panel to add a bookmark while playing back. Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 46 3. In the Month fi eld (to the right of Year), select the Month. 4. In the month grid, select the date within that month. (If a date in underlined in pink, video was recorded on that date.) Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 47: About Copying Video

    While playing a video, bookmark a scene to enable the bookmark feature in the Bookmark Copy window. The SVR-1670 supports the following types of copy media : This option will show the media currently inserted into your DVR. Select the disk Select Disk •...
  • Page 48: Chapter 12. Using Web Viewer

    JPG fi le, press the left button on the page while the orange outline is present. - The default ID is admin. - The default password is 11111111 (eight ones). 5. Click Login. Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 49 "1" is the slowest PTZ speed setting, and "6" is the fastest. Note The PTZ control and preset options are only compatible with PTZ enabled cameras, and the DVR must be configured with the correct settings. Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 50: Playback

    Each time the REW or FWD button is clicked, the play speed changes by one level. · PLAY Button: Plays a video. While a video is playing, it changes to the (PAUSE) button. Clicking the PAUSE button pauses the current video. · Stop Button: Stops a video. Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 51: Appendix A. Specifications Of The Svr-1670

    Appendix A. Specifi cations of the SVR-1670 Specifi cations of the SVR-1670 a. Max. Capacity 12 TB b. Internal HDD 4 HDD c. External HDD External HDD External eSATA 1 port Display d. Back -up DVD Writer : DVD+R/DVD-R/CD-R File Format : BMP, AVI, Proprietary format / JPG (Exclusive 1.
  • Page 52: Appendix B. Recording Program Default Settings

    Appendix A. Specifi cations of the SVR-1670 Normal Event General NTSC Resolution Quality Resolution Quality 1. Electrical Half Half a. Input Voltage 100 to 240 VAC; 50/60 Hz Half Half b. Power consumption Max. 50 W with 1x HDD Half Half 2.
  • Page 53: Appendix C. Supported Ptz Controllers And Protocols

    This table lists the PTZ controllers that can be used with the SVR 1670 DVR. Some protocols are expected to apply at a later date. Manufacturer Product SAMSUNG · Samsung-T TECHWIN · SCC-3100A · PELCO (P) PELCO · PELCO (D) HONEYWELL ·...
  • Page 54: Appendix F. Factory Default Settings

    On Screen Display Select All SPOT Covert Channel Deselect all Sequencing Number 1 is set to Channel 1 and Number 2 is set to Channel 2 in order. Dwell Time 5 sec Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 55 10 sec. Normal Event Source Deselect All System Event Source HDD Fail E-Mail >> Normal Sensitivity Lowest Area Set All Sensor Sensor1, N.O. Text >> Recording Device Manual Sync Text With Ch 1 Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 56 0.0.0.0 Port 4000 Bandwidth Limit (Kbps) 0000 xDSL Guest Password ***** Port 4000 Bandwidth Limit (Kbps) 0000 Status xDSL not connected. DDNS Interval Server www.samsungipolis.com None Password None Status DDNS not Registered Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 57 Serial Com1 >> Device None Interface RS232 Baud Rate 9600 Parity Bit None Stop Bit Data Bit CH1 >> Port None Protocol Samsung-T Camera ID Idle Time IP Filter Default Policy Deny Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 58 Power On Check X, Admin and User : O Copy Check X, Admin and User : O N/MIC Check X, Admin and User : O Exit Exit Save >> Do not save >> Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 59: Appendix G. Glossary

    United States. Setting son the SVR-1670 can adjust time to allow for DST. An ATM (Automated Teller Machine) provides data related to bank transactions. It is an external device for which the SVR-1670 can retrieve text data related to Direct Current. A unidirectional electric current that provides power to appliances.
  • Page 60 Images per second. Same as FPS. the moving parts of the camera head, which allow the control equipment to store The circular control on the front panel of the SVR-1670 that is used to adjust Preset location and move to a set reference point when the controller dictates or when an alarm Jog/Shuttle menu settings, navigate through on-screen menus and control PTZ cameras.
  • Page 61: Dimension

    A group of connectors on the rear panel of a DVR into which wires are inserted that Terminal block control camera position. A scene identifier presented by the SVR-1670 after a user searches for video. Thumbnail Selecting a thumbnail displays the recorded video that starts with the thumbnail frame.
  • Page 62 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 63 The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any non-source proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 64 Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 65 In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a 17. Interpretation of Sections 15 and 16. patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To “grant” such a patent Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 66 “work that uses the library”. The former contains code derived from the library, whereas the latter must be However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it combined with the library in order to run. Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 67 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), necessary. Here is a sample; alter the names: conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do Digital Video Recorder SVR-1670 Digital Video Recorder SVR-1670...
  • Page 68 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the The CE Marking on the products and/or their packaging signifi es that SAMSUNG TECHWIN CO.,LTD. holds the documentation and/or other materials provided with the distribution.
  • Page 69 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. • • 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Tol Free: +1-877-213-1222, FAX: +1-310-632-2195 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL: +44-1932-45-5300, FAX: +44-1932-45-5325 www.samsungtechwin.com...

Table of Contents