Guide Bar And Chain Combinations; Ec-Declaration Of Conformity - McCulloch CS 340 Operator's Manual

Guide bar and chain combinations

The following cutting attachments are approved for the models McCulloch CS 340 and CS 380.
Length, inch Pitch, inch
14 3/8"
16 3/8"

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service McCulloch CS 340 and CS 380 from 2011's serial numbers and onwards (the year is clearly
stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the
COUNCIL'S DIRECTIVES:
- of May 17, 2006 relating to machinery
"
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
Conformity assessment procedure according to Annex V of the above directive has been used.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2/A1:2009, CISPR 12:2007, EN ISO 11681-1:2008
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates
for EC type examination in accordance with annex IX, have the numbers: 0404/11/2298.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna March 1, 2011
Ronnie E. Goldman, Director of Engineering. (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
26 – English
TECHNICAL DATA
Guide bar
Gauge, mm Max. nose radius Type
1,3 7T
1,3 7T
2006/42/EC
"
Saw chain
Husqvarna H37,
Universal Outdoor
Accessories CHO 022
Husqvarna H37,
Universal Outdoor
Accessories CHO 027
1153988-26 Rev.4 2014-04-15
Length, drive
links (no.)
52
56